cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
616
Views
0
Helpful
3
Replies

Cisco AP1141N

hkdccisco1
Level 1
Level 1

I've Configured AP1141N with two SSIDs but only some windows clients able to see the SSID other clients not able to see the SSID

dot11 ssid <>

   vlan 10

   authentication open

   authentication key-management wpa version 2

   mbssid guest-mode

   wpa-psk ascii 7 <>

   information-element ssidl advertisement wps

!

dot11 ssid <>

   vlan 20

   authentication open

   authentication key-management wpa version 2

   mbssid guest-mode

   wpa-psk ascii 7 <>

3 Replies 3

Scott Fella
Hall of Fame
Hall of Fame

Is the problem with the first SSID you mentioned with this command?

information-element ssidl advertisement wps

Have you tried removing this to see if the clients can connect.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***

hkdccisco1
Level 1
Level 1

I have tried without this command also still same

Sent from Cisco Technical Support iPhone App

hkdccisco1
Level 1
Level 1

Once assign a channel using

Channel 2412

Other clients also able to detect the SSID

Sent from Cisco Technical Support iPhone App

Review Cisco Networking products for a $25 gift card