Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco MSE: change to the initial configuration

Hello, I've a MSE 3355 and I need to change its IP address. I know I can run another time the initial configuration script but I want to be sure I won't loose the database history. In other words, if the startup script will put the MSE to the factory default or if I'm safe changing the conf.

Many thaks for your help

Theo

 

Everyone's tags (1)
3 REPLIES

No it will not. You can re

No it will not. You can re run the script

New Member

Hello Salodh,Thanks for your

Hello Salodh,

Thanks for your reply, I did it and the setup was fine. Indeed when I check the status of the box, here is what I have:

[root@MSE-SNCF-LPD ~]# /etc/init.d/msed status
STATUS:
Health Monitor is running
Starting MSE Platform, Waiting to check the status.
Starting MSE Platform, Waiting to check the status.
Starting MSE Platform, Waiting to check the status.
Starting MSE Platform, Waiting to check the status.
Starting MSE Platform, Waiting to check the status.
Starting MSE Platform, Waiting to check the status.
Starting MSE Platform, Waiting to check the status.
Starting MSE Platform, Waiting to check the status.
Starting MSE Platform, Waiting to check the status.
Starting MSE Platform, Waiting to check the status.
Starting MSE Platform, Waiting to check the status.
Starting MSE Platform, Waiting to check the status.
Starting MSE Platform, Waiting to check the status.
Starting MSE Platform, Waiting to check the status.
Starting MSE Platform, Waiting to check the status.
Starting MSE Platform, Waiting to check the status.
Starting MSE Platform, Waiting to check the status.
Starting MSE Platform, Waiting to check the status.
Starting MSE Platform, Waiting to check the status.
Starting MSE Platform, Waiting to check the status.
Starting MSE Platform, Waiting to check the status.
Starting MSE Platform, Waiting to check the status.
Failed to get the status
[root@MSE-SNCF-LPD ~]#

 

I tried to stop/start the mse, tried to reboot it, but the status is still the same. Any help?

Thanks

New Member

Hi did you end up resolving

Hi did you end up resolving this? I have the exact same issue after changing the IP address.

156
Views
0
Helpful
3
Replies