I have a Cisco NCS(Prime Infrastructure) running the version 1.3 (184.108.40.206). I have added around 40 controllers to this Cisco NCS.
I wanted to push a Light Weight AP configuration template to a Cisco Flex 7500 controller that is added to this NCS. This 7500 controller has 1271 number of access points associated with it.
When i push a template from NCS to this WLC, I get an error message, "More than 1000 APs found for the given search criteria. Please narrow your search so that AP count in search result is not more than 1000."
I want to push the configuration to all the access points associated to the Flex controller.
I had to select the option, "Select by the controller name" in the LWAP configuration template. When i select the controller, I am not able to view whatever APs are associated to the contorller as i get the error message,
"More than 1000 APs found for the given search criteria. Please narrow your search so that AP count in search result is not more than 1000."
Could you please let me know if we have and option to select 600APs first and later another 600 APs? Please suggest.
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...