MESH requires more power than indoor AP's. They usually have direct power or use a special power injector or AC power plug. The AP model data sheet explains the power requirements. That's what Leo is getting at.
Just to add to Leo... Cisco's outdoor access points are known as MESH AP's. They don't have an outdoor AP anymore. They use to have the 1300's and 1400's but they are end of sale. The 1532 along with the 1552's can be setup like a normal AP, but these are still known as MESH AP's.
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...