We are trying to set up Apple TV on our 802.1x SSID. So far, we have input authentication as well as loaded two certificates from our Cisco ACS. I believe this did not need to be done.
Is there a way we can configure APPLE TV on our wireless network? And is there a Guide that I can follow to get this done? I have seen many documents but I have not seen that one that says, "do it this way, it works".
As steve pointed, it did not support WPA2/AES Enterprise (at least sometime back) & I used a wired connectivity to Apple TV, since my user wirless is 802.1x. This worked fine even they (Apple TV & clients) are sitting on different vlan
This is the latest (7.5.x) Apple TV deployment guide in case if you are on this code.
I've configure Apple TV with 802.1X, we use PEAP. Works fine with no issues. On the Apple TV you need to load the cert root and intermediate for who ever signed your cert on the radius server. In our case it was entrust. To see if it working, just check your Apple TV network settings make sure you have an IP address. Also you can quickly tell by seeing if the apple tv has the menu items up ..
Sent from Cisco Technical Support iPhone App
"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...