Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Cisco Wireless Roaming - Redundancy

Hi,

I'm looking for 2 types of solution:

1. Wireless Roaming without a controller

2. Access Point redundancy - Two Access Point with the same coverage but in a Active/Standby scheme. Is this posible?

 

Thanks.

Ivan
 

1 ACCEPTED SOLUTION

Accepted Solutions

Roaming is going to work so

Roaming is going to work so long as your configuration matches on the AP. i.e the PSK and SSID are the same.

 

If you are doing 802.1X then you would want to configure one of the AP as a WDS master so that you aren't having to authenticate all the way back to AAA on a roam.

WDS Configuration:

http://www.cisco.com/c/en/us/support/docs/wireless/aironet-1100-series/44720-WDS.html

 

You can also configure Hot Standby on an AP: http://www.cisco.com/c/en/us/td/docs/routers/access/wireless/software/guide/RolesHotStandby.html#wp1037487

 

HTH,

Steve

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
1 REPLY

Roaming is going to work so

Roaming is going to work so long as your configuration matches on the AP. i.e the PSK and SSID are the same.

 

If you are doing 802.1X then you would want to configure one of the AP as a WDS master so that you aren't having to authenticate all the way back to AAA on a roam.

WDS Configuration:

http://www.cisco.com/c/en/us/support/docs/wireless/aironet-1100-series/44720-WDS.html

 

You can also configure Hot Standby on an AP: http://www.cisco.com/c/en/us/td/docs/routers/access/wireless/software/guide/RolesHotStandby.html#wp1037487

 

HTH,

Steve

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
33
Views
0
Helpful
1
Replies
CreatePlease to create content