I have been troubleshooting a WLC 2106 that I was given for my learning lab. I powered the device up using my power supply from my ASA 5505, there was no console output and a green power light with an amber status light.
I know the general consensus...call TAC. This is not an option as I do not have a support contract. Please do not troll my post and direct me to TAC.
The device does seem to POST, all 8 port lights flash once.
When I put the flash card into my windows 7 machine I was prompted that the flash is not formatted (NO changes made)
After going through everything I believe the issue is with the flash card.
If someone could send me a .zip image of their flash card I would be forever grateful!!!!!
If an image is not an option maybe someone could please point me to the correct files I need to download/extract onto the flash card.
We are moving! Please use WLCCA Forum for updates and discussions
[toc:faq] Wireless LAN Controller (WLC) Config Analyzer Download Click
here to Download To request access, send an e-mail to
firstname.lastname@example.org. Please include your Cisco.com userna...
[toc:faq] IntroductionHere is the step by step process that we have to
take care of while converting LWAPP to IOS and then vice versa..LWAPP to
IOSThe hardware used = 1141 AP (make sure we are using the right
[toc:faq] Introduction AnyConnect Secure Mobility Client 3.0: Network
Access Manager & Profile Editor on Windows Summary Use the Cisco
AnyConnect Network Access Manager Profile Editor to build custom
profiles for the AnyConnect Secure Mobility Client. App...