Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

Cisco WLC 2500 Series setup with Windows Server 2008 R2

Dear Team,

I am new in this forum and I am planning to implement wireless network in my work place. Plan is to have two networks one for guests and one for employee. I am trying to find a guide for 2500 WLC but couldn't find one.

I've been reading couple of articles about setting up radius server and CA. I want to know what the best way to approach this.

In my environment I got a CA server windows server 2003 and current DC's are windows server 2008 R2.

I got 2500 WLC with POE switch and 4 aironet AS 1142.

Please let me know if you require further details and please help me.

Thanks

5 REPLIES
Hall of Fame Super Silver

Re: Cisco WLC 2500 Series setup with Windows Server 2008 R2

Here are some guides... The last two is a link with various examples.

http://www.cisco.com/en/US/docs/wireless/controller/2500/quick/guide/ctr2504_q_s.html

http://www.cisco.com/en/US/products/ps6366/products_configuration_example09186a0080665cdf.shtml

http://www.cisco.com/en/US/products/ps10315/prod_configuration_examples_list.html

http://www.cisco.com/en/US/products/ps6366/prod_configuration_examples_list.html

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
New Member

Cisco WLC 2500 Series setup with Windows Server 2008 R2

Hi Scott,

thanks for your reply. one thing i need to update here is my WLC is 2504 sorry i misstyped when i log this case.I will go through these guides and i post back the question if i struggle with them.

thanks

New Member

Cisco WLC 2500 Series setup with Windows Server 2008 R2

Could any one help me with step to step. I am really struggling i done CCNA previously but didn't setup WLC before. Could you please explain how i set all this up with basic terms.

Thanks

New Member

Cisco WLC 2500 Series setup with Windows Server 2008 R2

I've setup the WLC with the Radius server and done the Radius server bit but my WLC is not detecting the AP which is connected with POE switch. Please help

New Member

Hi, I found this document

Hi,

 

I found this document with a configuration example:

PEAP and EAP-TLS on Server 2008 and Cisco WLC

http://networklessons.com/wireless/peap-and-eap-tls-on-server-2008-and-cisco-wlc/

Keep in mind, this is not a Cisco document. However, it could be useful at some point.

 

Regards,

 

Eddinson S.

2376
Views
0
Helpful
5
Replies
CreatePlease to create content