Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

cisco WLC 2504 with 3750-x switch

Hai,

Please anyone let me know my issue.

I coneected my 2504 wlc with my 3750-x switch using port-channel. Later i came to know that LAG mode is not supported in 2500 series , so i removed port-channel from my core switch and connected all the 4 port in WLC to core without any port-channel. Is that recommenede??

one more thing is , from WLC i can ping tha management interface on my core. but i cannot ping the default-gateway of my dynamically created interface on my WLC to core(core is the defauly gateway for all). Please suggest.

Everyone's tags (6)
2 ACCEPTED SOLUTIONS

Accepted Solutions

Re: cisco WLC 2504 with 3750-x switch

Well you can connect more ports, just not with LAG or Channel

__________________________________________________________________________________________ "Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin ___________________________________________________________

cisco WLC 2504 with 3750-x switch

No, not like that ..

First the 2500 doesnt do LAG. But what you can do is assign a per port. Go into the controller, tap on the management interface. You should see a port number. You can then direct where the management traffic should transverse .

If you say put managment on 1 and then you put all your WLANS on port2, you would want to TAG on port 2 and TRUNK up to it. So your wlc will drop traffic on the wired appropiately.

Does this help ?

__________________________________________________________________________________________ "Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin ___________________________________________________________
9 REPLIES
New Member

cisco WLC 2504 with 3750-x switch

Hai,

Please anyone let me know my issue.

I coneected my 2504 wlc with my 3750-x switch using port-channel. Later i came to know that LAG mode is not supported in 2500 series , so i removed port-channel from my core switch and connected all the 4 port in WLC to core without any port-channel. Is that recommenede??

one more thing is , from WLC i can ping tha management interface on my core. but i cannot ping the default-gateway of my dynamically created interface on my WLC to core(core is the defauly gateway for all). Please suggest.

Re: cisco WLC 2504 with 3750-x switch

No, the 2504 is currently designed to have only one port connected to your LAN

Sent from Cisco Technical Support iPhone App

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
New Member

cisco WLC 2504 with 3750-x switch

Hai Stephen,

Thank u For your reply

That means i cannot connect the remaining ports in cisco 2504?? I can see 2 non PoE and 2 PoE ports in WLC 2504.

Then Why it is having 4 ports??

Re: cisco WLC 2504 with 3750-x switch

Well you can connect more ports, just not with LAG or Channel

__________________________________________________________________________________________ "Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin ___________________________________________________________
New Member

cisco WLC 2504 with 3750-x switch

So that means, Spanning tree will run and one ports will be active  at present rit??

Also, i can ping management interface default gateway from WLC to Core, but not from newly added  WLAN interfaces.

Is there any reason for that???

cisco WLC 2504 with 3750-x switch

No, not like that ..

First the 2500 doesnt do LAG. But what you can do is assign a per port. Go into the controller, tap on the management interface. You should see a port number. You can then direct where the management traffic should transverse .

If you say put managment on 1 and then you put all your WLANS on port2, you would want to TAG on port 2 and TRUNK up to it. So your wlc will drop traffic on the wired appropiately.

Does this help ?

__________________________________________________________________________________________ "Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin ___________________________________________________________

cisco WLC 2504 with 3750-x switch

you shoud be able to ping the dynamic interface. check your routing

__________________________________________________________________________________________ "Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin ___________________________________________________________
New Member

cisco WLC 2504 with 3750-x switch

Thank you George. Let me check this . Also, it is layer 2 connectivity between core and WLC . Default gateway is in the core itself. So, there is no mean for routing. I will check anyway. Thank you Boss

cisco WLC 2504 with 3750-x switch

Humm not really sure about that one without looking at the configs.

But I can assure you the dynamic interface is pingable. if you want to manage the WLC from the dymanic interface you would need to enable that feature in CLI.

Stop back if you have any other questions.

__________________________________________________________________________________________ "Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin ___________________________________________________________
2769
Views
10
Helpful
9
Replies
CreatePlease to create content