I am posting my current scenario of wireless. All clients are coming from APs and all DHCP polls are defined on WLC.
I want to direct terminate Internet on the WLC . so all the client coming from AP,s get IP from WLC and then use WLC their default gateyway and can browse internet. I could not find such scenario. Please help me to solve this problem
First off, that will not work. The WLC does not NAT so you need a layer 3 device inline that will do the NAT. Typically you would have the WLC in the inside network so that the access points can terminate to the WLC. Traffic is all tunneled to the WLC. You can then either use another port on the WLC and connect that to the DMZ where your firewall would do the NAT. You can also get another WLC and put it in the DMZ and tunnel guest traffic from the internal WLC to the guest anchor and them have the FW do the NAT.
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...