02-28-2014 01:36 PM - edited 07-05-2021 12:18 AM
Hi
I installed WLC 5508 with 7.4.1121.0 IOS version. I am trying to associate AP
AIR-LAP1131AG-A-K9, all i can see is that it is stuck in downloading under operational status. I see that it is not getting IP address too. Any suggestion
Regards
02-28-2014 03:10 PM
You caen try statically assign IP & configure WLC mgmt addres for the AP. Then It should register as long as AP has rechability to WLC management IP
Here is how you assign a static IP
LWAP-02#debug capwap console cli
LWAP-02#capwap ap ip address
LWAP-02#capwap ap ip default-gateway
LWAP-02#capwap ap controller ip address
Refer this post for more detail about AP registration process
http://mrncciew.com/2013/03/17/ap-registration/
If that does not work, pls paste the AP console output when it is trying to register.
HTH
Rasika
**** Pls rate all useful resposnes ***
02-28-2014 03:39 PM
Just to add... Put the ap on the same subnet as the WLC management and make sure there is DHCP. If you don't have DHCP available in that subnet, create one on the WLC for testing.
Sent from Cisco Technical Support iPhone App
02-28-2014 10:51 PM
HI Mohammed,
paste the out put of these commands:
from WLC: sh sysinfo
from AP: sh version
and also paste the bootup process from AP console access.
Regards
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide