Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Cisco WLC 5508 Intallation

Hi

I installed WLC 5508 with 7.4.1121.0 IOS version. I am trying to associate AP

AIR-LAP1131AG-A-K9, all i can see is that it is stuck in downloading under operational status. I see that it is not getting IP address too. Any suggestion

Regards

3 REPLIES
VIP Purple

Re: Cisco WLC 5508 Intallation

You caen try statically assign IP & configure WLC mgmt addres for the AP. Then It should register as long as AP has rechability to WLC management IP

Here is how you assign a static IP

LWAP-02#debug capwap console cli

LWAP-02#capwap ap ip address

LWAP-02#capwap ap ip default-gateway

LWAP-02#capwap ap controller ip address

Refer this post for more detail about AP registration process

http://mrncciew.com/2013/03/17/ap-registration/

If that does not work, pls paste the AP console output when it is trying to register.

HTH

Rasika

**** Pls rate all useful resposnes ***

Hall of Fame Super Silver

Re: Cisco WLC 5508 Intallation

Just to add... Put the ap on the same subnet as the WLC management and make sure there is DHCP. If you don't have DHCP available in that subnet, create one on the WLC for testing.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
VIP Purple

Cisco WLC 5508 Intallation

HI Mohammed,

paste the out put of these commands:

from WLC: sh sysinfo

from AP: sh version

and also paste the bootup process from AP console access.

Regards

129
Views
0
Helpful
3
Replies
CreatePlease login to create content