Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Cisco wlc 5508 with 30 Vlan

Hello
i need your help
i want to configure Cisco WLC 5508 whith 03 vlans, 3750 as core swich
- management Vlan
- local-user vlan
- Guest Vlan

i want to know all steps or config to do on WLC 
 

thx

3 REPLIES
VIP Purple

Hi,Just check this.It may

Hi,

Just check this.

It may help u.

Wireless LAN Controller and Lightweight Access Point Basic Configuration Example

http://www.cisco.com/c/en/us/support/docs/wireless/4400-series-wireless-lan-controllers/69719-wlc-lwap-config.html

 

http://rscciew.wordpress.com/2014/01/22/configure-dynamic-interface-on-wlc/

 

 

Webauth for guest users:

http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wlan-security/69340-web-auth-config.html

http://rscciew.wordpress.com/2014/06/19/wlc-webauth-configuration/

Regards

 

New Member

thank's for all answers

thank's for all answers

New Member

Hello,For the port connecting

Hello,

For the port connecting switch and controller make sure its trunk  & create the three VLANs you want to use

After the initial configurations you will have management VLAN  (as its required to enter the managment IP)

Controller -> interfaces

create the two interfaces for local-user vlan and guest vlan

make sure to enter the correct vlan/ subnet/ gateway / DHCP

 

Now go to WLAN tab

create the SSIDs and link each to the interface

You can add different security settings for each WLAN.

 

Hope this was helpful!

Cheers,

Nour

53
Views
0
Helpful
3
Replies
CreatePlease to create content