I'm wondering if anyone has ever stumbled across a staging script that I could modify to deploy a dozen controllers. I've seen some config generators in the past, but all I'm really looking for is a script that I can go in and modify. I am doing this more for consistancy (making sure everything that needs to be identical is identical) than anything else since GUI configuration can be accidentally misconfigured with names, etc.
Anyone know of anything? If so, are you willing to share?
I have built one for my company, but of course can't really share it. Started it about 7 years ago and just kept building on it to make staging fast.
One thing I can tell you to do for consistency is to build one WLC and make that 99% complete and test. Then you take that config and you manually edit it for all the other WLC's, IP address, hostnames, etc will change. Then you either use those as boot up scripts or you go throught the startup wizard and then upload the new config.
This is how I deploy many WLC's at a time:)
Please rate helpful post and Cisco Support Community will donate to Kiva
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...