I did a client mac debug on a Cisco WLC. In the debug output, I am able to see all the messages related to client association & authentication. But when the client is dis-associating, I am not seeing any dis-association messages.
My query is whether dis-association messages should show up in the debug output or not. The software version I am using is 22.214.171.124 & the controller model is 5508.
AFP process handles the state of the client through the 802.11 machine state and interacts with mobility code in order to validate the different roaming scenarios.When ever a client is disassociated it sents disassociation/deauthentication, or association timer expired. It should show in debug output.
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...
I have created a Powershell script to automatically add a Wireless Guest
User on Cisco WLCs. (tested on 2500 Series) The script should be
completely self explanatory. Prerequisites: Powershell SNMP Module
(Install-Module -Name SNMP) SNMP Write Access to y...