Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Client authentication in 802.1x

Hi Team,

Is it possible to configure wlc to use local net user database for client authentication if radius server fails..?

4 REPLIES
Community Member

Hello,from what I recall, if

Hello,

from what I recall, if the radius servers issues a "access-reject" then local authentication will not be used.

However if there is a problem with the radius server (down or not working properly), local authentication will be used, if configured.

 

Yes!!! You Can **Please rate

Yes!!! You Can laugh

**Please rate useful answers**

Yes, Local EAP is designed as

Yes, Local EAP is designed as a backup authentication system. If any RADIUS servers are configured on the controller, the controller tries to authenticate the wireless clients with the RADIUS servers first. Local EAP is attempted only if no RADIUS servers are found, either because the RADIUS servers timed out or no RADIUS servers were configured.

Bronze

Yes, you can.Please refer:

Yes, you can.

Please refer: http://www.cisco.com/c/en/us/support/docs/wireless/4400-series-wireless-lan-controllers/100590-ldap-eapfast-config.html

56
Views
0
Helpful
4
Replies
CreatePlease to create content