Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Clients through Mesh AP are unable to get IP

Dears

I am having 6 APs.Mesh is established and in all APs "Backhaul Client Access" is enabled.Problem is clients are able to get IP through Roof Top AP but not able to get ip from mesh AP.Is there noption i missed ? or any option i require to check or uncheck.

Please reply

5 REPLIES
Hall of Fame Super Silver

Re: Clients through Mesh AP are unable to get IP

So yoiu enabled "Backhaul Client Access" globally on the wlc. So now only 802.11a access will be allowed. So your clients are using 802.11a and not 802.11b/g correct?

-Scott
*** Please rate helpful posts ***
New Member

Re: Clients through Mesh AP are unable to get IP

Dear

I am sure you are right.But did we enable any client Acess as globally after mesh or keep it as default

Regards

Hall of Fame Super Silver

Re: Clients through Mesh AP are unable to get IP

If you leave it default then only 802.11bg will be used for client access, otherwise if enabled, only 802.11a will be used for client access.

-Scott
*** Please rate helpful posts ***
New Member

Re: Clients through Mesh AP are unable to get IP

But clients are not able to get IP address through MESH APs....but through RAP APs clients are able to get IP address

Regards

Hall of Fame Super Silver

Re: Clients through Mesh AP are unable to get IP

Do the client associate to 802.11a or 802.11b/g from the RAP?

-Scott
*** Please rate helpful posts ***
281
Views
0
Helpful
5
Replies
CreatePlease login to create content