I have a doubt. I do have at present 4400-50 , which have 50 N-Access Points installed and it is full. This is deployed already. Now I need to add around 80 N-AP's . Can I propose 5508 series controller? Will it be compatible with existing 4400-50 WLAN controller?
Re: Compatibility between 4400-50 and 5508 Controller
Depends on the firmware of the 4400. If the firmware of the 4400 is 6.X (or later) it should be able to work with the 5508. I recommend that you transfer all your APs connected to the 4400 to the 5508.
We are moving! Please use WLCCA Forum for updates and discussions
[toc:faq] Wireless LAN Controller (WLC) Config Analyzer Download Click
here to Download To request access, send an e-mail to
email@example.com. Please include your Cisco.com userna...
[toc:faq] IntroductionHere is the step by step process that we have to
take care of while converting LWAPP to IOS and then vice versa..LWAPP to
IOSThe hardware used = 1141 AP (make sure we are using the right
[toc:faq] Introduction AnyConnect Secure Mobility Client 3.0: Network
Access Manager & Profile Editor on Windows Summary Use the Cisco
AnyConnect Network Access Manager Profile Editor to build custom
profiles for the AnyConnect Secure Mobility Client. App...