If I have a mixture of wireless Access Points, Cisco 350 and 3Com 8000, can I use a common external antenna from one or the other vendor? For example can I use Cisco antennas with 3Com Wireless Access Points?
It is recommended to only use antennas that have been recommended by the manufacturer. The reason for this is that each manufacturer has tested their wireless devices with their antennas so they know what their antennas are capable of and what they are not capable of. If you use a third party antenna that is not approved of by that manufacturer, most likely they will not troubleshoot certain problems with you because you are not using antennas that they have tested and they will not know how to troubleshoot antenna problems. Cisco antennas have different connectors that are specific to Cisco products. If you use a Cisco antenna on your 3Comm you will have to get an adapter for the connectors.
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...