We have great coverage with the use of the 350 bridges, but we are unable to keep a wireless connection with our mobile equipment. Our mobile equipment averages about 30 mph and after about 10 minutes our radios go into limbo and we have to manually reset them. Is there any solution?
We have a number of sites using 350 bridges in mobile solutions, at speeds over 60 mph, so I am not sure why this is happening. The common things to look for are latest firmware loads, verify good connection between mobile and root bridges and check the logs for association data (to verify the mobile non-root is not bouncing back and forth between root bridges).
We are moving! Please use WLCCA Forum for updates and discussions
[toc:faq] Wireless LAN Controller (WLC) Config Analyzer Download Click
here to Download To request access, send an e-mail to
firstname.lastname@example.org. Please include your Cisco.com userna...
[toc:faq] IntroductionHere is the step by step process that we have to
take care of while converting LWAPP to IOS and then vice versa..LWAPP to
IOSThe hardware used = 1141 AP (make sure we are using the right
[toc:faq] Introduction AnyConnect Secure Mobility Client 3.0: Network
Access Manager & Profile Editor on Windows Summary Use the Cisco
AnyConnect Network Access Manager Profile Editor to build custom
profiles for the AnyConnect Secure Mobility Client. App...