cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2202
Views
5
Helpful
5
Replies

config t is not accepted in CAP3502i access point

ciscoroyzhang
Level 1
Level 1

Hi all

just been given a CAP 3502i access point, try to logon and configure the password, but not accept the config t. Is it because this equipted with Light weigh mode IOS?

I followed the link bellow: http://www.cisco.com/en/US/docs/wireless/access_point/12.4_10b_JA/command/reference/cr12410b-chap1.html 

Thanks

Roy

1 Accepted Solution

Accepted Solutions

Has the AP joined the WLC :

What you can do is you go to wireless  - > select the AP and override global credentialss to set a password for it specifically

View solution in original post

5 Replies 5

Leo Laohoo
Hall of Fame
Hall of Fame
Is it because this equipted with Light weigh mode IOS?

Yes.  It's because it's runnig CAPWAP IOS (default).

Thanks for prompt reply.  

is any way that provide me to telnet or use http to access to it, since it will be send to remote site, I would like to have some control if something goes wrong with it one day?

3502 series APs are CAPWAP only so you manage/troubleshoot from the WLC and not the AP directly.

Has the AP joined the WLC :

What you can do is you go to wireless  - > select the AP and override global credentialss to set a password for it specifically

Thanks Tuhin for sharing this information 5+

Vinay Sharma

Community manager

Thanks & Regards
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: