Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

config t is not accepted in CAP3502i access point

Hi all

just been given a CAP 3502i access point, try to logon and configure the password, but not accept the config t. Is it because this equipted with Light weigh mode IOS?

I followed the link bellow: http://www.cisco.com/en/US/docs/wireless/access_point/12.4_10b_JA/command/reference/cr12410b-chap1.html 

Thanks

Roy

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

config t is not accepted in CAP3502i access point

Has the AP joined the WLC :

What you can do is you go to wireless  - > select the AP and override global credentialss to set a password for it specifically

5 REPLIES
Hall of Fame Super Gold

config t is not accepted in CAP3502i access point

Is it because this equipted with Light weigh mode IOS?

Yes.  It's because it's runnig CAPWAP IOS (default).

New Member

config t is not accepted in CAP3502i access point

Thanks for prompt reply.  

is any way that provide me to telnet or use http to access to it, since it will be send to remote site, I would like to have some control if something goes wrong with it one day?

Silver

config t is not accepted in CAP3502i access point

3502 series APs are CAPWAP only so you manage/troubleshoot from the WLC and not the AP directly.

Cisco Employee

config t is not accepted in CAP3502i access point

Has the AP joined the WLC :

What you can do is you go to wireless  - > select the AP and override global credentialss to set a password for it specifically

config t is not accepted in CAP3502i access point

Thanks Tuhin for sharing this information 5+

Vinay Sharma

Community manager

Thanks & Regards
595
Views
5
Helpful
5
Replies