cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
504
Views
0
Helpful
2
Replies

configuration of cisco aironet 1260 series access point..??

a.b.hommies
Level 1
Level 1

i hv a cisco aironet 1262n access point and a normal router(without wlan)  with a broadband connection

now i want to use my access point as a wifi hotspot 
but i am not able to access it, through web browser
i dont know how i connect wires so that i am able to access "  AP access page" and also i forgot its IP address too so can u pls tell me how do i reset it to default 

1 Accepted Solution

Accepted Solutions

Leo Laohoo
Hall of Fame
Hall of Fame

Your AP is most likely loaded with a controller-based IOS.  You can easily convert this to autonomous IOS.

 

Read this:  Using a TFTP Server to Return to a Previous Release

View solution in original post

2 Replies 2

Leo Laohoo
Hall of Fame
Hall of Fame

Your AP is most likely loaded with a controller-based IOS.  You can easily convert this to autonomous IOS.

 

Read this:  Using a TFTP Server to Return to a Previous Release

This discussion has been reposted from Cisco User Groups to the Getting Started with Wireless community.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: