Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

configuration of cisco aironet 1260 series access point..??

i hv a cisco aironet 1262n access point and a normal router(without wlan)  with a broadband connection

now i want to use my access point as a wifi hotspot 
but i am not able to access it, through web browser
i dont know how i connect wires so that i am able to access "  AP access page" and also i forgot its IP address too so can u pls tell me how do i reset it to default 

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Your AP is most likely loaded

Your AP is most likely loaded with a controller-based IOS.  You can easily convert this to autonomous IOS.

 

Read this:  Using a TFTP Server to Return to a Previous Release

2 REPLIES
Hall of Fame Super Gold

Your AP is most likely loaded

Your AP is most likely loaded with a controller-based IOS.  You can easily convert this to autonomous IOS.

 

Read this:  Using a TFTP Server to Return to a Previous Release

New Member

This discussion has been

This discussion has been reposted from Cisco User Groups to the Getting Started with Wireless community.

136
Views
0
Helpful
2
Replies