11-21-2011 09:44 PM - edited 07-03-2021 09:06 PM
Hi,
I am working on Cisco 5508 WLC having 3310 MSE and 3502 APs, Now i have to configure the 5 Ghz and have b/g/n radio on, as per my ragulatory domain.
can any one help me in this.
Thanks
M.Bilal
Solved! Go to Solution.
11-23-2011 08:26 AM
B/G/N used 2.4 GHz... it will not use 5 GHz.. we cannot do it!! please google to get more info on it!! like wat uses wat!!
Regards
Surendra
11-23-2011 08:27 AM
You can't achieve that speed on the 2.4ghz. What is required for max of 300mbps is the use of 40mhz channel width. Under the wireless / 802.11a/n / DCA you see an option for 20mhz and 40mhz. If you don't have that option on the 2.4ghz then you will never achieve 300mbps.
Sent from my iPhone
11-21-2011 10:04 PM
Hi MB,
Not sure I follow.
1. Did you enable Clean Air on the WLC ?
2. Do you have WCS ?
11-21-2011 10:14 PM
Hi,
1- yes i have enable Clean Air on WLC.
2- and also using WCS.
All other function is perfectly working.
11-21-2011 10:18 PM
OK so what is the nature of your problem?
11-21-2011 10:23 PM
What domain is your controller configure for now
What is the full model of your access points (3500s)
What domain do you live in
11-21-2011 10:32 PM
1- Yes my controller is configured as per my regulatory domain
2- My AP model is AIR-CAP3502E-EK9
3- My domain is Pakistan
it is possible to configure 5 Ghz having b/g/n enable radio?
11-21-2011 10:38 PM
The 3502 has 2 WiFi chips / radios.
1 - Is a 2.4 GHz 802.11 b/g/n
1 - Is a 5 GHz 802.11a/n
Can you enable both radios -- If you domain allows it, yes. Which I beileve E does. Are you having problems enabling both ?
11-21-2011 10:46 PM
Yes I have enable all a/b/g/n but (a radio) is down.
i dont know why !
11-21-2011 10:54 PM
Check and make sure your A network is enabled.
click on wireless tab -- 802.11a -- network
see attached pix
11-21-2011 10:55 PM
yes it is enable
and i also check the cleintLink
11-21-2011 11:02 PM
Click on your ap and dive into the radio is it enabled? See attached
11-22-2011 11:30 PM
1- Yes my controller is configured as per my regulatory domain
2- My AP model is AIR-CAP3502E-EK9
3- My domain is Pakistan
it is possible to configure 5 Ghz having b/g/n enable radio?
Hi Bilal,
if your domain is Pakistan ..then you should get device from Cisco as regulatory domain -C..eg: AIR-CAP3502E-C-K9
thanks,
Anvar
11-22-2011 11:39 PM
Its a correction.....
sorry guys.... Regulatory domain is -C for Pakistan only with Standalone Access Points . and it is -E for Pakistan with all LWAPP APs.
again sorry for the miss lead..
Anvar
11-23-2011 08:20 AM
can any one guide me How i configure 5Ghz using b/g/n radio not in a/n.
i want to achive 300 Mbps.
thanks
11-23-2011 08:26 AM
B/G/N used 2.4 GHz... it will not use 5 GHz.. we cannot do it!! please google to get more info on it!! like wat uses wat!!
Regards
Surendra
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: