Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Configure administrator password through gui mode on acs 5.3

Hi

i forget the console admin password for acs 5.3 which is installed on vmware ,but am able to login through gui mode,

so is it possible to change username and pwd for console administrator through gui,if it is how to do that ?

Please help on this

By

Veeramani.G.

1 ACCEPTED SOLUTION

Accepted Solutions

Configure administrator password through gui mode on acs 5.3

Hi,

You can not reset console password from GUI. The console CLI is for the appliance and that password is not accessible from the application GUI.

You need the recovery DVD and you can reset the password then.

Here is the procedure: http://tiny.cc/k4sqjw

HTH

Amjad

You want to say "Thank you"?
Don't. Just rate the useful answers,
that is more useful than "Thank you".

Rating useful replies is more useful than saying "Thank you"
1 REPLY

Configure administrator password through gui mode on acs 5.3

Hi,

You can not reset console password from GUI. The console CLI is for the appliance and that password is not accessible from the application GUI.

You need the recovery DVD and you can reset the password then.

Here is the procedure: http://tiny.cc/k4sqjw

HTH

Amjad

You want to say "Thank you"?
Don't. Just rate the useful answers,
that is more useful than "Thank you".

Rating useful replies is more useful than saying "Thank you"
1785
Views
0
Helpful
1
Replies
CreatePlease to create content