Re: configure guest wlan on wlc 2106 to give only internet acce
Hopefully you've found a solution by now, but I wanted to respond anyway in case others find this useful.
There are quite a few options for Guest WLANs. The answer to your question depends on the security policies where the controller is being deployed. If you are allowed to have an open WLAN, that's probably the easiest solution - but is also the least secure as it does nothing to prevent unauthorized access to the wired network.
Another solution would be to create an SSID with only a single user account authorized on it, but allowing unlimited similtaneous logins for that user account. This would provide a minimum level of security, is relatively simple to configure, but would not work with the security requirements of most organizations.
The most secure guest wireless network would employ some kind of temporary authorization utilizing guest accounts, WPA2 encryption, and tunnel the guest traffic off your organization's LAN - but this sounds like overkill for your needs and would require a 4400 or 5500 series WLC.
My recommendation would be for you to read "Deploying and Troubleshooting Cisco Wireless LAN Controllers," available from Cisco Press. It goes through many possible guest network scenarios.
If you can reveal any of your security requirements and more details of the guest network you envision, I can provide more specific advice.
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...