Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Configuring Ap 1242

Hi, friend I want to set several SSID in one AP, each SSID below to different Vlan, All SSID have to spread.

thank for your help.

6 REPLIES
Silver

Re: Configuring Ap 1242

New Member

Re: Configuring Ap 1242

thank for you information, but I have a problem. When i try to connect to the SSID, I cant. I associated the ssid with specific vlan. I cant connect to the SSID

Hall of Fame Super Gold

Re: Configuring Ap 1242

Disable all authentication to your AP and let your PC/Laptop associate to it. Once this is possible, then you start adding some configuration such as Authentication.

Re: Configuring Ap 1242

Leo ~ 5 stars ! This is the best way to apply security when doing wireless in my humble opinion. There are some many factors when doing wireless security and start off easy and start adding on layers. And just the reverse when you have issues, take layers off...

__________________________________________________________________________________________ "Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin ___________________________________________________________
Hall of Fame Super Gold

Re: Configuring Ap 1242

Thanks for the ratings George.

New Member

Re: Configuring Ap 1242

thank for your help, I found the mistake, firts I created the vlan, second I created the SSID an asoociated one vlan with one SSID, but there is a potion Network ID,I think that was the problem, because when I Disable this option, I could connect to the SSID.

Example 1:

SSID: pisos SSID: oficina

Vlan: 10 Vlan: 20

Network ID: 10 Network ID: 20

Example 2:

SSID: pisos SSID: oficina

Vlan: 10 Vlan: 20

In the first example I cant connect and the second examle I can connect.

Now I want to kown in what situacion I have to put the Network ID.

I going to found out in the Cisco documentation.

Thank.

Marco

328
Views
5
Helpful
6
Replies
CreatePlease login to create content