Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Configuring Cisco Spectrum Expert Connect Mode

Withing Airmagnet's spectrum expert, how do you connect to a LAP that's in SE-Connect mode?

1 REPLY
Cisco Employee

Re: Configuring Cisco Spectrum Expert Connect Mode

SE-Connect—This  mode enables a user to connect a Spectrum Expert application running on  an external Microsoft Windows XP or Vista PC to a Cisco  CleanAir-enabled access point in order to display and analyze detailed  spectrum data. The Spectrum Expert application connects directly to the  access point, bypassing the controller. An access point in SE-Connect  mode does not provide any Wi-Fi, RF, or spectrum data to the controller.

#http://www.cisco.com/en/US/docs/wireless/controller/7.0/configuration/guide/c70cleanair.html#wp1171853

#When an access point is configured in SE-Connect  mode, Access points  that are configured in this mode do not serve the client.

1262
Views
0
Helpful
1
Replies
CreatePlease login to create content