Hi Guys,
I'm having trouble getting this connection up and running. The cellular device is activated and sees the Sprint base 1xRTT network.
I have used the config below, taken from Cisco site.
Any ideas guys ?
------------
chat-script cdma "" "ATDT#777" TIMEOUT 60 "CONNECT"
interface Cellular0/0/0
ip address negotiated
encapsulation ppp
dialer in-band
dialer string cdma
dialer-group 1
async mode interactive
ppp chap password 0 cisco
!
ip route 0.0.0.0 0.0.0.0 Cellular0/0/0
access-list 1 permit any
dialer-list 1 protocol ip list 1
line 0/0/0
exec-timeout 0 0
script dialer cdma
login
modem InOut
no exec
speed 144000
Thanks in advance