Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Cisco Employee

Configuring LocalNet Users

In the link below I see where there is a 24 character limit for localnet users.  However, the only time you get an error when trying to add a user(s) w/ more than 24 characters is from the CLI(the GUI doesn't give an error)

http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-4/configuration/guides/consolidated/b_cg74_CONSOLIDATED/b_cg74_CONSOLIDATED_chapter_0101111.html

Questions::

1) What authentication type(s) can be used on the WLAN to use these localnet users?  LEAP, EAP Fast....  what else?

2) If from the GUI a localnet username with more than 24 characters is used, can it login?

3 ACCEPTED SOLUTIONS

Accepted Solutions
Hall of Fame Super Silver

Re: Configuring LocalNet Users

Rob,

You can use the local net user for WebAuth also. It also fails if you create a password larger than 24. I tried it with a password of 30 characters.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
Hall of Fame Super Silver

Configuring LocalNet Users

I just tried it again... 24 and under works, anything over 24, I get a login error.

Thanks,

Scott

*****Help out other by using the rating system and marking answered questions as "Answered"*****

-Scott
*** Please rate helpful posts ***
Hall of Fame Super Silver

Re: Configuring LocalNet Users

Running the TAC release v7.6.100.4

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
5 REPLIES
Hall of Fame Super Silver

Re: Configuring LocalNet Users

Rob,

You can use the local net user for WebAuth also. It also fails if you create a password larger than 24. I tried it with a password of 30 characters.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
Cisco Employee

Re: Configuring LocalNet Users

Scott,

Please try if you will to create a user with more than 24 characters via the GUI then try to login using that ID.

For me, if I was doing my Webauth correct today, it worked!!!  which is totally messed up::::

Hall of Fame Super Silver

Configuring LocalNet Users

I just tried it again... 24 and under works, anything over 24, I get a login error.

Thanks,

Scott

*****Help out other by using the rating system and marking answered questions as "Answered"*****

-Scott
*** Please rate helpful posts ***
Cisco Employee

Re: Configuring LocalNet Users

Thanks Scott,

What version of code was your WLC running?

Hall of Fame Super Silver

Re: Configuring LocalNet Users

Running the TAC release v7.6.100.4

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
522
Views
0
Helpful
5
Replies
CreatePlease to create content