Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Configuring Multicell 1100

hi.....

requests ur help in following..

i want to configure two 1100 APs as a part of existing LAN...how i should i configure them..should it be multicell or root/repeater model users should be able to roam and get connected to the nearest AP to them while they are moving...

all helps are welcome..

regards..

shiju

1 REPLY
Silver

Re: Configuring Multicell 1100

The following are the configuration parameters:

1.SSID name: Configures a unique name per wireless VLAN

2.Default VLAN ID: Default VLAN-ID mapping on the wired side

3.Authentication types: Open, shared, and network-Extensible Authentication Protocol (EAP) types

4.Media Access Control (MAC) authentication: Under open, shared, and network-EAP

5.EAP authentication: Under open and shared authentication types

6.Maximum number of associations: Ability to limit maximum number of WLAN clients per SSID

For futher information verify the following URL:

http://cisco.com/en/US/products/hw/wireless/ps430/prod_technical_reference09186a00801444a1.html

125
Views
0
Helpful
1
Replies