Connecting AIR-ANT5160NP-R to 1602E - Do ABC positions matter?
I am setting up my first wireless device, a point-to-point bridge to get network access to a small warehouse near one of our buildings. I had a question regarding the cable positions for the A B and C connectors on our external antenna (AIR-ANT5160NP-R).
The 1602E has the connectors labelled as follows:
However, the antenna does not have any matching markings stating which port aligns with which each letter. I looked at the guide for the antenna and it doesn't mention anything.
I have it connected (and working) right now in our test lab and they are actually plugged in differently on both ends:
I figured it didn't make much of a difference (apart from having them configured the same on both ends). Then I saw this picture explaining how to set up a 4-port antenna with a 1600 series AP:
Is there a specifc way that the 3-port AIR-ANT5160NP-R should be connected to the 3-port 1602E?
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...