cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
279
Views
0
Helpful
1
Replies

Connecting Aironet 1200 and WGB 350

madeco
Level 1
Level 1

Dear Collegues

Perhaps you can help me out on this: I am connecting the units above, the 1200 on a Server 2000 network and the WGB on a peerless Win 98/XP network. The units will communicate with each other from their web based setup menus but not from within the networks. In each setup menu I have entered the opposite unit's IP as the gateway. What do you think?

Thank you for your time

1 Reply 1

vmoopeung
Level 5
Level 5

Check for the IP address and for the subnet address , check for the encryption key are fine if its enabled you can use the following links for troubleshooting.

http://www.cisco.com/en/US/products/hw/wireless/ps458/products_tech_note09186a00800a86d7.shtml

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_troubleshooting_procedures09186a0080094c6e.shtml

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: