Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Connecting Redundancy Port between two WLC 5508

Hello everyone

I need your help in order to confirm what cable type I should connect between WLC 5508 redundancy ports, this one must be cross over cable or straight through cable?

 

Thanks in advance

1 ACCEPTED SOLUTION

Accepted Solutions

a standard ethernet cable, so

a standard ethernet cable, so straight through

 

http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-4/configuration/guides/consolidated/b_cg74_CONSOLIDATED/b_cg74_CONSOLIDATED_chapter_01110100.html

 

--

HTH,

Steve

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
1 REPLY

a standard ethernet cable, so

a standard ethernet cable, so straight through

 

http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-4/configuration/guides/consolidated/b_cg74_CONSOLIDATED/b_cg74_CONSOLIDATED_chapter_01110100.html

 

--

HTH,

Steve

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
769
Views
0
Helpful
1
Replies
CreatePlease login to create content