Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

Connection problem with BR350

Hi again,

seems my problem is not in combination with the Terminalserver from Microsoft.

The connection interrupts if there is a lot of traffic sending between the both stations.

Message in the log is: Deauthenticate [NAME] MAC ADDRESS : reason "Not Authenticated"

Today, I locked permanantly at the connection. There was no data send between the both stations and the connection was stable.

But the days before I had a lot of transfer volumne over the "line" and it losts connection every couple of minutes.

Is this normal? I hope not? Any solutions? Maybe someone from Cisco knows what to do.

Oh, by the bay. It runs with firmware 12.02T1.

Thanks again

David

1 REPLY
Cisco Employee

Re: Connection problem with BR350

Hi David,

What sort of average signal strength and quality do you see on the antenna alignment test ?

Do you see a lot of CRC errors on the radio interfaces ?

Do you see a lot of discards ?

At what sort of rate of traffic are you seeing these problems ?

235
Views
0
Helpful
1
Replies
CreatePlease to create content