Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Console & Configuration for the WISM

we are in the process of upgrading the wireless network in the office to use the Unified solution. We have converted the WLSE to the WCS and now in the process of configuring the WISM cards. 1st off we are having an issue with the console connection to the wism card. we are using the rollover cable connected to a termserver and are unable to get in. 2nd trying to configure the wism card is becoming a hassle. we set up the service port so far and the managment vlan and we still see service port down. Looking for some help in configuration. Please advise.

2 REPLIES
Bronze

Re: Console & Configuration for the WISM

Can you post the configuration you have? That would help me to understand where is your configuration missing and suggest accordingly.

New Member

Re: Console & Configuration for the WISM

actually it turned out to be a faulty wism card but i do have a question regarding configuration. i am have 2 wism cards installed in 2 different chassis since the service vlan is local can it be configured the same on both chassis?

296
Views
0
Helpful
2
Replies