Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

controller access using service port

Hi,

We have two 5508 in ha(ap sso) mode. the service port is configured with 192.168.125.1.

Will i be able to access the controller web interface ( https://192.168.125.1 ) if my laptop is directly connected to the controllers service port(SP) using a ethernet cable.

I was able to do this before, but seems after configuring the HA , it is not accessible any more via service port.

Please help on this.

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

Re: controller access using service port

Might want to look at this thread

https://supportforums.cisco.com/thread/2203573

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
1 REPLY
Hall of Fame Super Silver

Re: controller access using service port

Might want to look at this thread

https://supportforums.cisco.com/thread/2203573

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
108
Views
0
Helpful
1
Replies
CreatePlease login to create content