Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Controller-based access points conversion

Q:

I’ve the 1140 AP (LAP) flavor; can I convert it to Standalone access points?

If yes can you please explain how and if you have documentation that will be great.

Thank you all for reading and helping.

  • Getting Started with Wireless
1 REPLY
Hall of Fame Super Gold

Re: Controller-based access points conversion

You can convert the AP from autonomous AP (aAP) to light-weight AP (LWAP) and vice versa.  It all boils down to the IOS you run.

If you have a WLC, ollow the proceedure below:
Using a Wireless LAN Controller to Return to a Previous Release
http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp157689

If you don't have a WLC, follow the proceedure below:
Using a Wireless LAN Controller to Return to a Previous Release
http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp157689

If you find my post helpful, please do not hesistate to rate.  Thank you very much.

414
Views
0
Helpful
1
Replies
This widget could not be displayed.