Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Controller command question

Hello Guys,

just a simple question, how do I use """""""""" | INCLUDE """"" in WLCs. I am unable to find pipe option in WLC CLI could anyone help. I am trying to search

sh runnin | include capwap --------- but its not working

runing 7.3.103.14

2 ACCEPTED SOLUTIONS

Accepted Solutions
Hall of Fame Super Silver

Re: Controller command question

There is no pipe in the AirOS which the WLC runs. In the 3850 and 5760's you can since they are IOS.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
Hall of Fame Super Silver

Re: Controller command question

Capwap is default for WLC's with the newer code, that's why I ask what exactly are you looking for.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
9 REPLIES
Hall of Fame Super Silver

Re: Controller command question

There is no pipe in the AirOS which the WLC runs. In the 3850 and 5760's you can since they are IOS.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
New Member

Controller command question

thats gona increase my work !

Thanks for reply scott, how do I check capwap for all controller at once ?

Hall of Fame Super Silver

Re: Controller command question

What exactly are you looking for?

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
New Member

Re: Controller command question

we have couple of AP down and want to see is there any problem with CAPWAP.

Hall of Fame Super Silver

Re: Controller command question

Well an ap not joining usually is a network related issue. You can alway go to the GUI and under Monitor, look at the statistic for ap join.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
Hall of Fame Super Silver

Re: Controller command question

Capwap is default for WLC's with the newer code, that's why I ask what exactly are you looking for.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
Hall of Fame Super Silver

Re: Controller command question

You can only see stats or information when the ap is joined to the WLC. Other than that, information from the ap console shows good information. Also looking at the switch port for errors or the switch logs can help.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
New Member

Re: Controller command question

thanks for quick reply, seems like a network issue.

Re: Controller command question

Hello,

As per your query i can suggest you the following solution-

I agree with Scott as there is no pipe in the Air OS which the WLC runs. In the 3850 and 5760's you can since they are IOS.

Hope this will help you.

221
Views
0
Helpful
9
Replies