Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Bronze

convert AP1131AG-A-K9 image to lightweight

Hi,

How do I convert an AP1131AG-A-K9 AP to the image that is supported by a 5508 controller?

Thanks.

1 ACCEPTED SOLUTION

Accepted Solutions
VIP Purple

Re: convert AP1131AG-A-K9 image to lightweight

Download a recovery image (eg c1130-rcvk9w8-tar.124-10b.JDA.tar) for this AP model from Cisco & then upload it to your Autonomous AP using a TFTP server using below command.

AP5475.d0f5.2ee7# archive download-sw /force-reload /overwrite tftp://x.x.x.x/c1130-rcvk9w8-tar.124-10b.JDA.tar

Here is an example post of how to do this coversion

Once do this your AP is ready to register for a controller.

HTH

Rasika

**** Pls rate all useful responses ***


1 REPLY
VIP Purple

Re: convert AP1131AG-A-K9 image to lightweight

Download a recovery image (eg c1130-rcvk9w8-tar.124-10b.JDA.tar) for this AP model from Cisco & then upload it to your Autonomous AP using a TFTP server using below command.

AP5475.d0f5.2ee7# archive download-sw /force-reload /overwrite tftp://x.x.x.x/c1130-rcvk9w8-tar.124-10b.JDA.tar

Here is an example post of how to do this coversion

Once do this your AP is ready to register for a controller.

HTH

Rasika

**** Pls rate all useful responses ***


337
Views
0
Helpful
1
Replies
CreatePlease login to create content