convert aronet 2602e cap to sap

[_Ratha_]

I have problem with cisco aronet cap2602E-S-K9 to SAP ios, but after I have change to SAP ios and reboot router while the middle of booting AP is shutdown automatically and not up any more unless restart and reboot is still not completed such as picture here while booting up. OS SAP that I use is ap3g2-k9w7-tar.152-4.JB5.tar

thank for help

[Leo Laohoo]

Using a TFTP Server to Return to a Previous Release

[Scott Fella]

Download the image again and check the md5 and use the link that Leo posted to upload the image to the AP. That should do the trick.  

[_Ratha_]

Thank you for you help, now it working normal after re-download os and upload to router againt.

[Scott Fella]

Yeah... When I see that error, it's always usually a bad image.

[abwahid · Accepted solution]

Hi,

Go through the below link and perform step by step as mentioned, this hopefully will help you

if there is something wrong in conversion steps.

https://supportforums.cisco.com/document/57476/lwapp-autonomous-conversion-and-vice-versa-access-points