Welcome to Cisco Support Community. We would love to have your feedback.
For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.
Hi everyone, we've got quite a few 1230B's that we'd like to leverage in our upcoming WLC deployment and I'm wondering if we can convert these autonomous AP's to be Lightweights?
Go to Solution.
For all IOS-based 1200 series modular access point (1200/1220 Cisco IOS Software Upgrade, 1210 and 1230 AP) platforms, it depends on the radio:
-if 802.11G, MP21G and MP31G are supported
-if 802.11A, RM21A and RM22A are supported
The 1200 series access points can be upgraded with any combination of supported radios: G only, A only, or both G and A.
You cannot upgrade access points with 802.11b-only or first-generation 802.11a radios.
Thus, 1230B can't be upgraded to LWAP.
Please take a look:
If your product number is AIR-AP1231G-x-K9, then it can be upgraded to LAP.