Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

Copy Access-List

     Hello guy.

I have one question, I have a WLC 5508 and I have some WLC I need to know if is possible copy this ACL and paste on my secondary WLC.

I was wondering because I don´t wan to create them again GUI interface.

Thanks

2 ACCEPTED SOLUTIONS

Accepted Solutions
VIP Purple

Copy Access-List

It should be "show run-config commands" I think steve miss it in hurry

else if you have a backup of your 5508, then you can find the same from there

HTH

Rasika

VIP Purple

Copy Access-List

Hi Harvinder,

Are you sure about "show running configuration" exist in 5508 ? I do not think so

Rasika

4 REPLIES

Copy Access-List

sure, pull a show run-config and copy the ACL.  When you go to paste into the othe WLC type config first, and it should paste in

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
VIP Purple

Copy Access-List

It should be "show run-config commands" I think steve miss it in hurry

else if you have a backup of your 5508, then you can find the same from there

HTH

Rasika

Silver

Copy Access-List

HEllo,

issue the command: show running configuration in the wlc 5508, copy the particular access-list and then go to the other WLC in shich you want to add and in the configuration mode add the access-list.

VIP Purple

Copy Access-List

Hi Harvinder,

Are you sure about "show running configuration" exist in 5508 ? I do not think so

Rasika

803
Views
0
Helpful
4
Replies
CreatePlease to create content