Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

could not connect CISCO-LWAPP-CONTROLLER

Could no connect my AIR-CAP2602I-C-K9  to WLC 2125. How to resolve?

LAP Deatils:

===============

Last reset from power-on

LWAPP image version 7.4.1.37

1 Gigabit Ethernet interface

*Mar  1 00:13:01.543: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROLLER

*Mar  1 00:13:01.543: %CAPWAP-3-ERRORLOG: Discovery response from MWAR 'UCB_HO-03-WLC-01'running version 5.2.193.0 is rejected.

*Mar  1 00:13:01.543: %CAPWAP-3-ERRORLOG: Failed to decode discovery response.

*Mar  1 00:13:01.543: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 2 state 2.

*Mar  1 00:13:01.543: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller

*Mar  1 00:13:01.543: %CAPWAP-3-ERRORLOG: Failed to process unencrypted capwap packet from 172.28.255.50

Last reset from power-on
LWAPP image version 7.4.1.37
1 Gigabit Ethernet interface

32K bytes of flash-simulated non-volatile configuration memory.

Base ethernet MAC Address: F8:72:EA:A7:08:05

Part Number                          : 73-14588-02

PCA Assembly Number                  : 800-37899-01

PCA Revision Number                  : A0

PCB Serial Number                    : FOC172261GK

Top Assembly Part Number             : 800-38356-01

Top Assembly Serial Number           : FGL1725W371

Top Revision Number                  : A0

Product/Model Number                 : AIR-CAP2602I-C-K9  

% Please define a domain-name first.

Error:

*Mar  1 00:13:01.543: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROLLER
*Mar  1 00:13:01.543: %CAPWAP-3-ERRORLOG: Discovery response from MWAR 'UCB_HO-03-WLC-01'running version 5.2.193.0 is rejected.
*Mar  1 00:13:01.543: %CAPWAP-3-ERRORLOG: Failed to decode discovery response.
*Mar  1 00:13:01.543: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 2 state 2.
*Mar  1 00:13:01.543: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller
*Mar  1 00:13:01.543: %CAPWAP-3-ERRORLOG: Failed to process unencrypted capwap packet from 172.28.255.50

1 REPLY
VIP Purple

Re: could not connect CISCO-LWAPP-CONTROLLER

21xx series controller does not support  anything above 7.0.x software code

.

http://www.cisco.com/en/US/docs/wireless/controller/5500/tech_notes/Wireless_Software_Compatibility_Matrix.html

2600 series AP required minimum 7.2.110.x

Therefore you cannot register a 2600 series AP to a 21xx controller (2125 in your case)

HTH

Rasika

***** Please rate all useful responses ****

1324
Views
0
Helpful
1
Replies
CreatePlease login to create content