I've recently started to deploy RF profiles on various sites based on different data rate requirements. I know before the days of RF Profiles that Coverage Hole Detection (CHD) was enabled on the WLAN.
My query is, now that RF profiles exists, can you disable CHD on a specific WLAN and enable it on an RF profile or does it have to be enabled on both for it to function?
I still need to play with 8.0, that is why I was asking because I am not sure on that version. What I gather from the documentation it is the same... http://www.cisco.com/c/en/us/td/docs/wireless/controller/8-0/configuration-guide/b_cg80/b_cg80_chapter_01011101.html
However, with 7.6 you will need to have it enabled on the WLAN as there is no way to 're-enable' it on the RF Profile. You could tweak it to not be kicked off often though
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...