Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Crashinfo and .rcore files

1) What is crashinfo and .rcore used for? why the access point will generate these messages?

2) How do i check to ensure that these messages will not appear again?

3) I find that when i delete the files, the signal strength actually increase a lot more. Why is so?

Directory of flash:/

2 -rwx 2072 May 06 2008 18:51:55 +08:00 private-multiple-fs

6 drwx 512 May 06 2008 18:51:23 +08:00 c1200-k9w7-mx.123-8.JA2

3 -rwx 131072 Nov 01 2006 16:27:27 +08:00 r12_56013_8E20_946815C4.rcore

4 -rwx 5164 May 06 2008 18:51:55 +08:00 config.txt

139 -rwx 131072 Nov 01 2006 16:27:40 +08:00 r12_56013_8E20_9528C279.rcore

5 -rwx 27 May 06 2008 18:51:55 +08:00 private-config

140 -rwx 365698 Jun 28 2007 15:00:28 +08:00 crashinfo_20070628-070020

150 -rwx 131072 Jul 04 2007 16:01:49 +08:00 r12_56013_8E20_BE3D02C0.rcore

152 -rwx 131072 Jul 04 2007 16:02:02 +08:00 r12_56013_8E20_BEFF64C6.rcore

153 -rwx 131072 Jan 18 2008 15:37:47 +08:00 r12_56013_8E20_75226CFD.rcore

154 -rwx 131072 Jan 18 2008 15:38:00 +08:00 r12_56013_8E20_75E4FE12.rcore

155 -rwx 338618 Jan 21 2008 11:46:55 +08:00 crashinfo_20080121-034648

156 -rwx 131072 Feb 19 2008 16:49:31 +08:00 r12_56013_8E20_2F55DD38.rcore

157 -rwx 131072 Feb 19 2008 16:49:44 +08:00 r12_56013_8E20_3017F938.rcore

158 -rwx 330378 Mar 12 2008 14:06:17 +08:00 crashinfo_20080312-060609

151 -rwx 714 Mar 01 2002 08:00:13 +08:00 env_vars

7741440 bytes total (700416 bytes free)

1 REPLY
Cisco Employee

Re: Crashinfo and .rcore files

open a TAC case and have them see if there is a hardware issue or software issue.... crashes and rcore files are not a good thing.

199
Views
0
Helpful
1
Replies
CreatePlease to create content