cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
415
Views
0
Helpful
1
Replies

Create 2 IP addresses on one Cisco AP per vlan?

se
Level 1
Level 1

Hallo,

to get it simple -

I have only one switch with following equipement attached:

1 x AP1130AG,

1 x WLSE Express,

1 x DHCP/DNS-Server for 10.0.0.0/24 subnet,

1 x DHCP/DNS-Server for 192.168.2.0/24 subnet.

The AP, WLSE and the DHCP-/DNS-Server (192.168.2.0/24) are in the native vlan 1.

But the AP is also with the second DHCP-/DNS-Server in vlan 2.

Could get the AP two seperate IP-addresses per vlan? When not how I have to design the network? - With routing?

I am happy when somebody is able to help.

Sincerely

se

1 Reply 1

jolmo
Level 4
Level 4

Hi se

This is how I do it (I don't have WLSE):

- Create a ssid per vlan in the AP.

- Configure switch to AP connection as a trunk.

- If needed, configure helper addresses in switch.

If you need routing between VLANs, you will need a router, afaik AP cannot do it.

HTH

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: