In reviewing the lab for WLC configuration, they used a dedicated vlan for all APs and the WLC to communicate with CAPWAP.
In the production environment I'm designing for, a campus network that has many LAN connected sites all with different vlans at the edge, that would entail trunking another vlan out to the edge switches. It also requires the MetroEthernet provider to provision the same beforehand.
One of the advantages of the WLC is the ability to avoid having to add vlans at the edge for WLANs, but what about a dedicated vlan for the APs and WLC to communicate with CAPWAP? A best practice?
As best practice we've only two options, keep the AP on L2 vlan(not scalable) of management or on any L3(vlan that is not part of dynamic interface of WLC) which is scalable and good for highavailability.
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...