We have several wireless conference rooms equiped with Aironet 340 equipment. Most people have Cisco wireless cards for their PCs. I have a 802.11b card for my PC but not the Cisco brand. Short of asking a collegue to let me look through his setup screens to identify the SSID used, I thought I'd try the default SSID used when installing Cisco equipment. (ie. my Linksys card uses the word linksys for cards and hubs as default). Any advice?
It worked! Shocking because after an hour of trying different things with no luck and being told by several advisors that we don't use an SSID (blank)and that the problem is that 802.11b aren't all compatible, I suggested "try tsunami as the ID." Not only did it work, they're now on to why their Compaq wireless cards seemed incompatible. They now work too. I'll never get how Cisco came to chose it. Thank you to all of you.
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...